1. Marantz Sr5007 Owners Manual
2. Marantz Sr5007 Users Manual Free
3. Marantz Sr5007 Users Manual Download
4. Marantz Sr5007 User's Manual Free
5. Vintage Marantz Owners Manuals

version Basic

Read and download Marantz Stereo Receiver SR5007 A/V Receiver SR5007 User's Manual Page 28 online. Download free Marantz user manuals, owners manuals, instructions, warranties. Marantz SR5007 manual: Accessories. If not installed and used in accordance with the instructions, may cause.

version Advanced

Information

nSAFETY PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLEPARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature

accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFETY

INSTRUCTIONS

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings.

Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-typeplug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as power-supplycord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION:

To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet.

The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user.

FCC INFORMATION (For US customers)

1.COMPLIANCE INFORMATION

Product Name: AV Surround Receiver Model Number: SR5007

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.

Marantz America, LLC.

(a D&M Holdings Company) 100 Corporate Drive, Mahwah, NJ, 07430, U.S.A. Tel. (630) 741-0300

2.IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by marantz may void your authority, granted by the FCC, to use the product.

3.IMPORTANT

When connecting this product to network hub or router, use only a shielded STP or ScTP LAN cable which is available at retailer.

Follow all installation instructions. Failure to follow instructions could void your authority, granted by the FCC, to use the product.

4.NOTE

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the product into an outlet on a circuit different from that to which the receiver is connected.

•Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.

For Canadian customers:

This Class B digital apparatus complies with Canadian ICES-003.

I

nNOTES ON USE

WARNINGS

•Avoid high temperatures.

Allow for sufficient heat dispersion when installed in a rack.

•Handle the power cord carefully.

Hold the plug when unplugging the cord.

•Keep the unit free from moisture, water, and dust.

•Unplug the power cord when not using the unit for long periods of time.

•Do not obstruct the ventilation holes.

•Do not let foreign objects into the unit.

•Do not let insecticides, benzene, and thinner come in contact with the unit.

•Never disassemble or modify the unit in any way.

•Ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths or curtains.

•Naked flame sources such as lighted candles should not be placed on the unit.

•Observe and follow local regulations regarding battery disposal.

•Do not expose the unit to dripping or splashing fluids.

•Do not place objects filled with liquids, such as vases, on the unit.

•Do not handle the mains cord with wet hands.

•When the switch is in the OFF (STANDBY) position, the equipment is not completely switched off from MAINS.

•The equipment shall be installed near the power supply so that the power supply is easily accessible.

DVD

n CAUTIONS ON INSTALLATION

z

z z

z

Wall

zz For proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure.

•More than 12 in. (0.3 m) is recommended.

•Do not place any other equipment on this unit.

II

Getting started

Thank you for purchasing this marantz product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference.

Contents

Getting started···············································································1 Accessories···················································································2 Features························································································2 Cautions on handling·····································································3

Basic version············································································4

Connections···················································································5 Important information····································································5 Connecting anHDMI-compatibledevice·······································7 Connecting anHDMI-incompatibledevice··································12 Connecting a device with amulti-channeloutput connector······23 Connecting a external power amplifier········································24 Connecting to a home network (LAN)·········································25 Connecting the power cord·························································26

Setup·····························································································27 Set up speakers (Audyssey® Setup)···········································27 Making the network settings (Network)······································33 Playback (Basic operation)··························································34 Important information··································································34 Playing aBlu-rayDisc player/DVD player·····································35 Playing a CD player······································································35 Playing an iPod············································································36 Playing a USB memory device····················································39 Listening to FM broadcasts·························································42 Network contents········································································50 Listening to internet radio···························································50 Playing back files stored on a PC and NAS·································53 Using online services··································································57 Convenient functions··································································65 AirPlay function···········································································69

Selecting a listening mode (Sound Mode)································71 Selecting a listening mode··························································71

Advanced version································································76

Installation/connection/setup of speakers (Advanced)···········77 Speaker installation·····································································77 Speaker connection·····································································79 Set up speakers···········································································87 Connections (Advanced connection)·········································89 Connecting the REMOTE CONTROL connectors·······················89 Connecting an external control device········································90 Playback (Advanced operation)··················································91 HDMI control function·································································91 Sleep timer function····································································92 Web control function···································································93 Dual backup memory function····················································95 Panel lock function······································································95 Remote lock function··································································96 Various memory functions··························································97 Playback in ZONE2 (Separate room)··········································98 Audio output················································································98 Playback······················································································98 Sleep timer function····································································99 How to make detailed settings················································100 Menu map·················································································100 Examples of menu screen displays···········································102 Examples of menu····································································103 Inputting characters···································································104 Audio·························································································105 Video·························································································111 Inputs························································································116 Speakers····················································································120 Network·····················································································124 General······················································································128

Informations·········································································134

Part names and functions·························································135 Front panel················································································135 Display·······················································································136 Rear panel·················································································137 Remote control unit···································································138

Other information······································································140 Trademark information······························································140 Surround····················································································141 Relationship between video signals and monitor output··········145 Explanation of terms·································································147

Troubleshooting········································································150 Resetting the microprocessor···················································154 Specifications·············································································155

version Basic

version Advanced

Information

y u

o Q0

DVD

Features

With a discrete-circuitconfiguration, the power amplifier provides identical quality for all 7 channels (100 W x 7ch, 8 Ω)

The unit is equipped with a power amplifier that reproduces highfidelity sound in sound mode with equal quality and power for all channels, true to the original sound.

The power amplifier circuit adopts a discrete-circuitconfiguration that achieveshigh-qualitysurround sound reproduction.

Supports internet radio, music, and photograph streaming

Supports AirPlay® (vpage 69)

You can enjoy a wide variety of content, including listening to Internet radio, playing the audio files stored on your PC, and displaying on a TV the photographs stored on your PC.

This unit also supports AirPlay that lets you stream your music library from an iPhone, iPad, iPod touch or iTunes.

“Setup Assistant”, providing easy-to-followsetup instructions

First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers, network, etc.

Easy to use, Graphical User Interface

This unit is equipped with an easy to see “Graphical User Interface” that uses menu displays and levels. The use of level displays increases operability of the this unit.

HDMI connectors enable connection to various digital AV devices (input: 6, output: 1)

The unit is equipped with 6 HDMI input connectors for connecting devices with HDMI connectors, such as a Blu-rayDisc player, game machine, HD digital camcorder, etc.

Compatible with “marantz Remote App” for performing basic operations of the unit with an iPad, iPhone or Android smartphonez1

“marantz Remote App” is application software that allows you to perform basic operations with an iPad, iPhone, Android smartphone or Android tablet such as turning the unit ON/OFF, controlling the volume, and switching the source.

z1 Download “marantz Remote App” from iTunes® App Store. The unit needs to be connected to a LAN and the iPhone/iPod touch needs to be connected to the same network byWi-Fi(wireless LAN).

Supports HDMI (3D, ARC, Deep Color, “x.v.Color”, Auto Lip Sync, 4K) and HDMI control function (vpage 7)

In addition to HDMI 3D and ARC (Audio Return Channel) functions, this unit supports the video pass-throughfunction, which outputs video to TV without changing the video quality when video signals of 4K (3840 × 2160 pixels) are input, and the GUI overlay function, which overlays the menu screen (GUI) on the 4K video screen.

vSee overleaf

version Basic

version Advanced

Information

Features

Digital video processor up-scalesanalog video signals (SD resolution) to 4K

This unit is equipped with the 4K video upscaling function, which allows for outputting analogue or SD (standard video quality) video to HDMI at 4K (3840 × 2160 pixels). This enables the unit and a TV connected with a single HDMI cable and any video source to be reproduced precisely with HD level of quality.

Direct play for iPod® and iPhone® via USB (vpage 19)

Music data from an iPod can be played back if you connect the USB cable supplied with the iPod via the USB port of this unit, and also an iPod can be controlled with the remote control unit for this unit.

M-XPort(marantz-eXtensionPort) (vpage 22)

This unit is equipped with the M-XPort,a marantz original innovation that provides outstanding expandability. You can connect the Wireless Receiver RX101 (sold separately) to this port.

DVD

Cautions on handling

•Before turning the power on

Check once again that all connections are correct and that there are no problems with the connection cables.

•Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the power cord from the power outlet.

•About condensation

If there is a major difference in temperature between the inside of the unit and the surroundings, condensation (dew) may form on the operating parts inside the unit, causing the unit not to operate properly.

If this happens, let the unit sit for an hour or two with the power turned off and wait until there is little difference in temperature before using the unit.

•Cautions on using mobile phones

Using a mobile phone near this unit may result in noise. If that occurs, move the mobile phone away from this unit when it is in use.

•Moving the unit

Turn off the power and unplug the power cord from the power outlet. Next, disconnect the connection cables to other system units before moving the unit.

•About care

•Wipe the cabinet and control panel clean with a soft cloth.

•Follow the instructions when using a chemical cleaner.

•Benzene, paint thinner or other organic solvents as well as insecticide may cause material changes and discoloration if brought into contact with the unit, and should therefore not be used.

3

Basic version

Basic version

Here, we explain the connections and basic operation methods for this unit.

F Connectionsvpage 5

F Setup vpage 27

F Playback (Basic operation)vpage 34

F Selecting a listening mode (Sound Mode)vpage 71

4

Important information

Make connections before using this unit.

To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables.

nnHDMI-compatibledevice

If your video device does not support HDMI connections, use the following connection.

nnHDMI-incompatibledevice

nnHDMI-compatibledevice

This unit can change the source that is assigned to the DIGITAL AUDIO IN and COMPONENT VIDEO IN connectors.

You can change the source for connectors listed in Input connector setting within pages that describe connections for devices.

For details on assigning a source to connectors, see “Changing the source assigned to connectors” (vpage 12). For the setting method, see “Input Assign” (vpage 117).

NOTE

•The menu screen is only displayed on TV connected to this unit via HDMI. If your TV is connected to this unit via other video output connectors, perform menu operations while seeing the display on this unit.

•Do not plug in the power cord until all connections have been completed. However, when the “Setup Assistant” is running, follow the instructions in the “Setup Assistant” (C page 7) screen for making connections. (During “Setup Assistant” operation, the input/output connectors do not conduct current.)

•When running the “Setup Assistant” (C page 7), turn off the power supply of connected devices.

•When making connections, also refer to the operating instructions of the other devices being connected.

•Be sure to connect the left and right channels properly (left with left, right with right).

•Do not bundle power cords together with connection cables. Doing so can result in noise.

nnOthers

version Basic

version Advanced

Information

Converting input video signals for output (Video conversion function)

This unit is equipped with three types of video input connectors (HDMI, Component video and video) and three types of video output connectors (HDMI, Component video and video).

This function automatically converts various formats of video signals input to this unit into the formats used to output the video signals from this unit to a monitor.

GFlow of video signals for MAIN ZONEH

Important information

Make Settings as Necessary

•If you do not want this unit to convert video signals automatically, use the following setting item to disable this function.

“Video Conversion” (vpage 113)

•If you want to change the resolution of video signals output to the TV, use the following setting item to do so.

“Resolution” (vpage 114)

•The video conversion function supports the NTSC, PAL, SECAM, NTSC 4.43, PAL-N,PAL-MandPAL-60formats.

•Resolutions of HDMI-compatibleTVs can be checked at “Video” – “Monitor” (vpage 130).

NOTE

•The menu screen is only displayed on TV connected to this unit via HDMI. If your TV is connected to this unit via other video output connectors, perform menu operations while seeing the display on this unit.

•HDMI signals are digital. HDMI signals cannot be converted into analog signals.

•When a non-standardvideo signal from a game machine or some other source is input, the video conversion function might not operate.

For example, if you connect this unit to an HDMI-compatibleTV with a single HDMI cable, this unit automatically converts input signals other than HDMI video signals to HDMI signals to output from the HDMI connector to the TV. This unit outputs only one type of video signals, so video signals output from this unit to the TV remain unchanged even if you switch to a device that outputs another type of video signals for playback. Therefore, you do not need to switch the video input on the TV. Furthermore, this unit converts the input analog video signals such as video and component video signals to high resolution digital HDMI video signals for output, improving the quality of the video.

If your TV does not support HDMI connections, connect this unit to TV with analog video connectors. This unit can not convert HDMI input signals to analog video signals, so when inputting from an HDMI device, use component video or video input connectors.

Connecting an HDMI-compatibledevice

You can connect up to seven HDMI-compatibledevices(6-inputs/1-output)to the unit.

If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. Connections with an HDMI cable offer the following benefits that can not be achieved with other connection methods.

•High quality playback by transmitting audio and video via digital signals

HDMI connections can transmit high definition video and high quality audio formats adopted by Bluray disc players (Dolby Digital Plus, Dolby TrueHD, dts-HD,dts-HDMaster Audio).

HDMI connections also convey information required for playback between devices. The information is used for copyright protection and TV resolution recognition, the ARC function, the HDMI control function, etc.

•Transmission of audio and video signals with a single HDMI cable

Previous connections require multiple audio and video cables, but HDMI connections require only a single HDMI cable to transmit audio and video signals. This allows wires in a home theater system, which tend to be complicated, to be more organized.

•Mutual control through the HDMI control function (vpage 91)

This unit and the HDMI device connected via HDMI can be linked to perform operations such as power control, volume control, and input source switching.

•Other video and audio functions, such as 3D video playback, Content Type, the ARC function, are supported (vpage 11).

•There is more than one version of HDMI standard. The supported functions and the performance vary according to the version. This unit complies with the HDMI standard, supporting the ARC and 3D playback functions. To enjoy these functions, the HDMI device connected to this unit also needs to use the same version of the standard. For the version of the HDMI standard on the device connected to this unit, see the device’s manual.

•Some TVs do not support audio input via HDMI connections. For details, see your TV’s manual.

nn Before connecting this unit to TV via HDMI connections(vpage 8) nn Connecting this unit to a TV via HDMI connections(vpage 9)

nn Connecting this unit to video devices via HDMI connections(vpage 10)

nn HDMI function(vpage 11)

nn Settings related to HDMI connections(vpage 11)

Before connecting this unit to TV via HDMI connections

There are 2 methods to connect HDMI-compatibleTV to this unit.

Use the connection method that suits your TV.

Does the TV to be connected to this unit support the ARC function?

Yes

Connecting this unit to a TV via HDMI connections (vpage 9)

No

Connecting this unit to a TV via HDMI connections (vpage 9)

+

Connecting a TV (vpage 13)

For audio connections, use a method other than HDMI connections.

DVD

Connecting an HDMI-compatibledevice

nnAbout ARC (Audio Return Channel) function

This function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.

If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected to this unit are transmitted to the TV, but this unit can not play back the audio from the TV. If you want to enjoy surround audio for TV program, a separate audio cable connection is required.

In contrast, if a TV with the ARC function is connected via HDMI connections, no audio cable connection is required. Audio signals from the TV can be input to this unit through the HDMI cable between this unit and the TV. This function allows you to enjoy surround playback on this unit for the TV.

When the ARC function is used, connect a device with a “Standard HDMI cable with Ethernet” or “High Speed HDMI cable with Ethernet” for HDMI.

Refer to the owner’s manual for your TV for details about TV connection and settings.

GConnection to a TV with the ARC functionH

Audio from the TV

Audio signals from the TV

Marantz Sr5007 Owners Manual

GConnection to a TV without the ARC functionH

Audio from the TV

Audio signals from the TV

8

Connecting this unit to a TV via HDMI connections

Cables used for connections

Audio and video cable (sold separately)

HDMI cable

TV

HDMI

IN (ARC)

DVD

Connecting an HDMI-compatibledevice

•Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, switch the Blu-rayDisc/DVD player’s resolution to a resolution with which the monitor is compatible.

•When this unit and monitor are connected with an HDMI cable, if the monitor is not compatible with HDMI audio signal playback, only the video signals are output to the monitor. Make audio connections (vpage 13 “Connecting a TV”).

Marantz Sr5007 Users Manual Free

NOTE

•The audio signal from the HDMI output connector (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs.

•When connecting a TV that does not support the ARC function, an audio cable connection is required in addition to the HDMI cable. In this case, refer to “Connecting a TV” (vpage 13) for the connection method.

For the ARC function, see “About ARC (Audio Return Channel) function” (vpage 8).

Connecting to a device equipped with a DVI-Dconnector

The DVI-D(Digital Visual Interface) method is also used for video transmission via digital signals. This is developed mainly for computers, and some AV devices such as projectors are equipped with this interface. To output HDMI video signals to aDVI-Dvideo input compatible device, use an HDMI/DVI conversion cable, which converts HDMI video signals to DVI signals.

The DVI-Dconnector can transmit high quality digital signals, but the copy guard and other issues may hinder normal operations for some device combinations.

NOTE

•No sound is output when connected to a device equipped with a DVI-Dconnector. Make audio connections as described in “Connecting a TV” (vpage 13).

•Signals cannot be output to DVI-Ddevices that do not support HDCP.

•Depending on the combination of devices, the video signals may not be output.

9

Connecting this unit to video devices via HDMI connections

Cables used for connections

Audio and video cable (sold separately)

HDMI cable

• This interface allows transfer of digital video signals and digital audio signals over a single HDMI cable.

Marantz Sr5007 Users Manual Download

Connecting an HDMI-compatibledevice

Digital camcorder

HDMI

OUT

GFront panelH

• When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable.

•When connecting a device that supports Deep Color or 4K, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.

• Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, switch the Blu-rayDisc/DVD player’s resolution to a resolution with which the monitor is compatible.

GRear panelH

HDMI function

This unit supports the following HDMI functions:

nnAbout 3D function

This unit supports input and output of 3D (3 dimensional) video signals of HDMI.

To play back 3D video, you need a TV and player that provide support for the HDMI 3D function and a pair of 3D glasses.

NOTE

•When playing back 3D video, refer to the instructions provided in the manual of your playback device together with this manual.

•When playing back 3D video content, the menu screen or status display screen can be superimposed over the image. However, the menu screen or status display screen cannot be superimposed over certain 3D video content.

•If 3D video with no 3D information is input, the menu screen and status display on this unit are displayed over the playback video.

•If 2D video is converted to 3D video on the television, the menu screen and status display on this unit are not displayed correctly. To view the menu screen and status display on this unit correctly, turn the television setting that converts 2D video to 3D video off.

nnAbout 4K function

This unit supports input and output of 4K (3840 × 2160 pixels) video signals of HDMI.

When a device supporting 4K is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.

nnHDMI control function (vpage 91)

This function allows you to operate external devices from the unit and operate the unit from external devices.

NOTE

•The HDMI control function may not work depending on the device it is connected to and its settings.

•You cannot operate a TV or Blu-rayDisc player/DVD player that is not compatible with the HDMI control function.

Connecting an HDMI-compatibledevice

nnDeep Color (vpage 147)

When a device supporting Deep Color is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”.

nnAuto Lip Sync (vpage 112, 147)

nn“x.v.Color”, sYCC601 color, Adobe RGB color, Adobe YCC601 color (vpage 147, 148)

nnHigh definition digital audio formatnnARC (Audio Return Channel) (vpage 8)

Copyright protection system

In order to play back digital video and audio such as BD-VideoorDVD-Videovia HDMI connection, both this unit and TV or the player need to support the copyright protection system known as HDCP (Highbandwidth Digital Content Protection System). HDCP is copyright protection technology comprised of data encryption and authentication of the connected AV devices. This unit supports HDCP.

•If a device that does not support HDCP is connected, video and audio are not output correctly. Read the owner’s manual of your television or player for more information.

Settings related to HDMI connections

Set as necessary. For details, see the respective reference pages.

nnHDMI Setup (vpage 112)

Make settings for HDMI video/audio output.

NOTE

The audio signal input from the HDMI input connector can be output as an output signal from the HDMI output connector by setting the HDMI audio output destination to TV.

Audio signals input via the Analog/Coaxial/Optical input connectors cannot be output from the HDMI MONITOR output connector.

nnAbout Content Type

This function was added with the HDMI standard. It automatically makes settings suitable for the videooutput type (content information).

NOTE

To enable the Content Type, set “Video Mode” to “Auto” (vpage 113).

For high quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices (vpage 7 “Connecting anHDMI-compatibledevice”).

This section describes connections when your device does not support HDMI connections.

Connection methods for various devices

Cables used for connections

Changing the source assigned to connectors

This unit can change the source that is assigned to the DIGITAL AUDIO IN and COMPONENT VIDEO IN connectors.

Here, a connection to the Blu-raydisc player is taken as an example for explanation. The rear panel video input and digital audio input connectors do not have the input connector indication forBlu-raydisc players(Blu-ray).You can assignBlu-raydisc players to these connectors to use them forBlu-raydisc players. Select“Blu-ray”when switching functions on this unit to play back the source connected to these connectors.

nnHow to change the source assigned to connectors (vpage 117)

version Basic

version Advanced

Information

Connecting a TV

•This section describes how to connect when your TV does not support HDMI connections.

For instructions on HDMI connections, see “Connecting an HDMI-compatibledevice” (vpage 7).

•If the TV connected to this unit is equipped with an HDMI connector that supports ARC, digital audio signals from TV can be transmitted to this unit (vpage 8 “About ARC (Audio Return Channel) function”). The ARC function allows you to enjoy on this unit the audio from TV programs and HDMI devices directly connected to TV, without having to make a separate audio connection. For the ARC function, also see your TV’s manual.

listen to TV audio through this device, use the optical digital connection.

For video connections, see “Converting input video signals for output (Video conversion function)” (vpage 6).

nnAudio connection

The following methods are available for connecting to this unit. Use either of the methods to make a connection.

a DIGITAL AUDIO OPTICAL connector DIGITAL AUDIO COAXIAL connectorz

When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play back surround sound.

zzWhen making this type of connection, you must change the settings on this unit. (v Input connector setting )

Connecting an HDMI-incompatibledevice

Input connector setting

When making the following connection, you must change the input connector settings.

aDIGITAL AUDIO COAXIAL connector

When connecting to connectors marked as 1, change “CBL/SAT” to “TV AUDIO”.

For how to change, see “Input Assign” (vpage 117).

TV

nnVideo connection

The following methods are available for connecting to this unit. Use either of the methods to make a connection.

The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved.

a COMPONENT VIDEO OUT (MONITOR) connector

This makes an analog video connection. This connection method separates video signals into 3 signals for transmission based on color components, achieving the best quality video playback among analog video connections, with less signal degradation.

s VIDEO OUT (MONITOR) connector

This makes an analog video connection.

DVD

NOTE

•The menu screen is only displayed on TV connected to this unit via HDMI. If your TV is connected to this unit via other video output connectors, perform menu operations while seeing the display on this unit.

•If you do not connect this unit to your TV via HDMI, do not make HDMI connections for video inputs from other video devices, either. For details see “Converting input video signals for output (Video conversion function)” (vpage 6).

13

Connecting an HDMI-incompatibledevice

This section describes how to connect when your satellite tuner or cable TV does not support HDMI connections.

For instructions on HDMI connections, see “Connecting an HDMI-compatibledevice” (vpage 7).

nnAudio connection

The following methods are available for connecting to this unit. Use either of the methods to make a connection.

The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved.

a DIGITAL AUDIO COAXIAL connector DIGITAL AUDIO OPTICAL connectorz

When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play back surround sound.

zzWhen making this type of connection, you must change the settings on this unit. (v Input connector setting )

s AUDIO IN (CBL/SAT) connector

This makes an analog audio connection. This type of connection converts digital audio to analog audio, so the output audio may be degraded compared to connections a.

nnVideo connection

The following methods are available for connecting to this unit. Use either of the methods to make a connection.

The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved.

a COMPONENT VIDEO IN (CBL/SAT) connector

This makes an analog video connection. This connection method separates video signals into 3 signals for transmission based on color components, achieving the best quality video playback among analog video connections, with less signal degradation.

s VIDEO IN (CBL/SAT) connector

This makes an analog video connection.

Input connector setting

When making the following connection, you must change the input connector settings.

aDIGITAL AUDIO OPTICAL connector

When connecting to connectors marked as 1, change “TV AUDIO” to “CBL/SAT”.

For how to change, see “Input Assign” (vpage 117).

version Basic

version Advanced

Information

Connecting a DVD player

This section describes how to connect when your DVD player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatibledevice” (vpage 7).

nnAudio connection

The following methods are available for connecting to this unit. Use either of the methods to make a connection.

The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved.

a DIGITAL AUDIO COAXIAL connector DIGITAL AUDIO OPTICAL connectorz

When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play back surround sound.

zzWhen making this type of connection, you must change the settings on this unit. (v Input connector setting )

s AUDIO IN (DVD) connector

This makes an analog audio connection. This type of connection converts digital audio to analog audio, so the output audio may be degraded compared to connections a.

nnVideo connection

The following methods are available for connecting to this unit. Use either of the methods to make a connection.

The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved.

a COMPONENT VIDEO IN (DVD) connector

This makes an analog video connection. This connection method separates video signals into 3 signals for transmission based on color components, achieving the best quality video playback among analog video connections, with less signal degradation.

s VIDEO IN (DVD) connector

This makes an analog video connection.

Connecting an HDMI-incompatibledevice

Input connector setting

When making the following connection, you must change the input connector settings.

aDIGITAL AUDIO OPTICAL connector

When connecting to connectors marked as 1, change “TV AUDIO” to “DVD”.

For how to change, see “Input Assign” (vpage 117).

DVD player

Connecting a Blu-rayDisc player

This section describes how to connect when your Blu-raydisc player does not support HDMI connections. For instructions on HDMI connections, see “Connecting anHDMI-compatibledevice” (vpage 7).

nnAudio connection

The following methods are available for connecting to this unit. Use either of the methods to make a connection.

a DIGITAL AUDIO COAXIAL connector

DIGITAL AUDIO OPTICAL connector

When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play back surround sound. However, digital bit stream audio signals for HD audios from Blu-raydisc players (such as Dolby Digital Plus anddts-HD)can not be transmitted.

When making this type of connection, you must change the settings on this unit. (v Input connector setting )

Connecting an HDMI-incompatibledevice

Blu-rayDisc player

nnVideo connection

The following methods are available for connecting to this unit. Use either of the methods to make a connection.

a COMPONENT VIDEO IN connector

This makes an analog video connection. This connection method separates video signals into 3 signals for transmission based on color components, achieving the best quality video playback among analog video connections, with less signal degradation.

When making this type of connection, you must change the settings on this unit. (v Input connector setting )

Input connector setting

When making the following connection, you must change the input connector settings.

aDIGITAL AUDIO COAXIAL connector

When connecting to connectors marked as 1, change “CBL/SAT” to “Blu-ray”.

DIGITAL AUDIO OPTICAL connector

When connecting to connectors marked as 1, change “TV AUDIO” to “Blu-ray”.

aCOMPONENT VIDEO IN connector

When connecting to connectors marked as 1, change “CBL/SAT” to “Blu-ray”.

For how to change, see “Input Assign” (vpage 117).

DVD

When you want to play back HD Audio (Dolby TrueHD, DTS-HD,Dolby Digital Plus, DTS Express) and Multichannel PCM with this unit, use an HDMI connection (vpage 7 “Connecting anHDMI-compatibledevice”).

16

Connecting a digital camcorder

This section describes how to connect when your digital camcorder does not support HDMI connections.

Marantz Sr5007 User's Manual Free

For instructions on HDMI connections, see “Connecting an HDMI-compatibledevice” (vpage 7).

nnAudio connection

The following methods are available for connecting to this unit. Use either of the methods to make a connection.

The numbers prefixed with connectors indicate the recommendation order. The smaller the number is, the higher playback quality is achieved.

Connecting an HDMI-incompatibledevice

Digital camcorder

Vintage Marantz Owners Manuals

a DIGITAL AUDIO COAXIAL connector

DIGITAL AUDIO OPTICAL connector

When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play back surround sound.

When making this type of connection, you must change the settings on this unit. (v Input connector setting )

The following methods are available for connecting to this unit.

a COMPONENT VIDEO IN connector

This makes an analog video connection. This connection method separates video signals into 3 signals for transmission based on color components, achieving the best quality video playback among analog video connections, with less signal degradation.

When making this type of connection, you must change the settings on this unit. (v Input connector setting )

Input connector setting

When making the following connection, you must change the input connector settings.

aDIGITAL AUDIO COAXIAL connector

When connecting to connectors marked as 1, change “CBL/SAT” to “AUX”.

DIGITAL AUDIO OPTICAL connector

When connecting to connectors marked as 1, change “TV AUDIO” to “AUX”.

aCOMPONENT VIDEO IN connector

When connecting to connectors marked as 1, change “CBL/SAT” to “AUX”.

For how to change, see “Input Assign” (vpage 117).

DVD

You can enjoy games by connecting a game machine via the AUX input connector. In this case, select the input source to “AUX”.

NOTE

When a non-standardvideo signal from a game machine or some other source is input, the video conversion function (vpage 6) might not operate. In this case, use the monitor output of the same connector as the input.

17